Uv sterilizer lamp
Uv sterilizer lamp
Precautions for use
▶Before connecting to the power supply: please check whether the power supply voltage matches.
●The power cord of this device cannot be replaced. If the power cord is damaged, the device should be discarded.
●Before using this product, please carefully check whether the glass of the lamp tube is broken.
●During use, if you find that the lamp tube has water ingress, please cut off the power immediately and stop using it. ●Ultraviolet lamp radiation emitted by this product is harmful to health, especially for unprotected eyes and skin. Do not use it in places where it is directly exposed.
Maintenance Precautions
Before maintaining the lamp body, the power must be cut off.
▶Please ensure that the power is disconnected before cleaning. ▶Do not use aggressive substances for cleaning.
Recommendations
Choose the appropriate lamp according to the size of the tank and the length of the filter tank, use it 3-4 times a week, about 10 minutes to 1 hour each time, if there are too many algae and diseased fish, turn it on for 1-2 hours a day , Do not exceed 2 hours, and resume normal use until the symptoms become smaller, and the effect will be obvious after about a week of use.
manual
When the water flows through the germicidal lamp through the function of the circulating water pump, after being irradiated by the ultraviolet light emitted by the germicidal lamp for a short time, the germs and germs in the water and
Most algae are killed. Link the germicidal lamp to the submersible pump, and use the power of the submersible pump to make the water flow through the sterilization treatment of this product. Remember, the germicidal lamp can only be used in the filter tank, not directly in the fish tank, otherwise the fish will be exposed to ultraviolet radiation for a long time. Injured or killed by exposure.
Additional Information:
Not Available |